On life, cars, and business.

Life has happened.

My last post here was over 9 months ago. For a small update, the 960 is done, and has been for some time. A few other small projects have happened in the meantime, and some cars have come and gone.

In December of 2021, life gave me a major reset. I didnt want it, but it happened and I am now in a much better place because of it. The lease on my house was ending, and my time in Greensboro was coming to an end. It was time for me to move on from my position at Haileys and start my search for a new job to get me back on track for a full time career. In the interim I moved down to Charleston, SC with my parents. I lost my girlfriend over this whole series of events too, stating the distance would never work. Everything I had to comfort me, everything that was my daily routine was gone.

This business, my business, something that started off as a hobby, kept me motivated. This buisness gave me a reason to get out of bed in the morning when I felt like I had no other use. In truth, I didnt have much of a use other than walking the dog or doing some stuff around the house. For the past 2 months I spent my time trying to make it the best it could be. Finally I could focus on it full time and see how sucessful it could really be with 100% of my dedication behind it. NordCarolina LLC is an official business in South Carolina. Taxes and all.

I got to explore some cool places during this time, learned a lot of new spots to check, and met some interesting people along the way. Even my parents helped, clearing out some space in the garage for me to work and keep my car. Took it day by day and tried my best.

Now, I am back on track. NordCarolina has become my secondary work again. I recently began my position at SRI Performance as a Marketing Specialist. I am now based out of Mooresville, and spend most of my weekends at or around racing. Its just the start, but it feels like part of a bigger picture.

Hopefully soon once my life begins to settle into more of a regular routine, I can pick back up on my posts here. I have a lot of big plans for the 960, some of which may never happen now that I do not have access to a shop or big garage anymore. But never the less, I am always tinkering and finding new things to show the world. (Or well maybe the 3 people who read these blog posts). Keep an eye out, I have a cool youtube video in the works that ties into a product on the site that some may enjoy. Hell, maybe now I will finally get around to finishing the sunroof delete post.

2022, new job, new house, new life, same old shitty Volvos.

Volvo 960 Project Pt. 6 - Still Alive

As usually, my writings tend to drop off during the spring into the early summer. The weather is nicer, things are happening and with the full removal of any travel and event restrictions, my time on weekends isnt spent sitting at a desk all day. Actually, that’s a lie but I am still busy! God knows how much Volvo stuff has been going on since my last post back in March, but it has been a lot. Progress on the 780 has been slow / stalled out. I have lost a lot of motivation in working on it, and just have been waiting for a few small pieces to tie it all together and get it ready for sale. In the mean time, I have started a project on the 960 that I never thought I would have the ability to do… fully deleting the sunroof.

This topic has been, shall we say sensitive, to many of my European friends across the internet as they believe that a sunroof is the peak of luxury. “How could you do this, and why?!” they say. I said, with an angle grinder.

But all joking aside this was a project a long time coming, as the sunroof in my 960 had been leaking for some time. Even after resealing the glass and the drains, I was still getting significant water intrusion into the car. The roof and headliner were a few things I never really showed off in the car, or always tried to hide in photos. Much of the panels were either damaged, peeling, ripped, etc. I wanted to redo the interior, but it would have been a moot point if it was just going to get damaged by water again.

The headliner was severely damaged from water, and had warped entirely.

Like anything, the best way to start was jumping right in. I started by removing almost all the interior panels from the door panels up. Much of the tan fabric interior had signs of water damage as it was peeling away from the brittle plastic backing. The headliner, which had been sagging for some time, was in a state when removed. The cardboard like material was falling apart, and signs of mold were beginning to show.

I also collected all the pieces I was going to need for the interior. Thankfully, a 940 wagon interior was just what I needed. The panels are identical to the 960, but lack the fabric covering, make them very easy to work with and paint. I was also able to get the new headliner from said 940, which did not have the hole from the sunroof. Lets just say, driving with a spare headliner inside a car of the same size, isnt very fun.

The panels laid out in the sun for drying.

For this project I grabbed the A, B, and C pillar panels, all of which were painted with a coat of Duplicolor Vinyl and Fabric Coating, gloss black. This was also used on the headliner as well. it adhered very well to the panels after they were quickly wiped down and cleaned before paint. Using the sun, they dried almost instantly. All of the small interior pieces also received a quick spray like the mirror cover trim, grab handles, and screw covers.

After removing the interior assembly of the sunroof, it was time to sink the teeth in. This was easily the hardest part of the process, not because of the very slow grinding, but also because I wasnt quite sure how I should be doing it. The sunroof is supported inside the roof by an extra cage that is welded into the roof structure and has the roof skin folded down into it. The metal would need to be removed to make room for the new headliner, so cutting was a must. The first corner was rough, however I slowly started to get a feel for how the metal was shaped and where to cut to make pulling the supports out easy.

DONT BE LIKE ME, COVER YOUR WINDOWS AND PANELS BEFORE GRINDING OR WELDING!

With the supports out, I had reached the first ‘checkpoint’ of the project. However, seeing the big hole in the roof was certainly not very fun. It looked awful, all jagged and bent up. I wondered to myself if it was ever going to turn out the way I wanted.

With the roof out it was time to start devising the plan on how it would all go back together. The sunroof support cage also functioned as the cross member support for the roof skin. Without it the roof is very flexible and tends to bend and distort with any sort of pressure or high winds. A new cross support was needed.

Reusing the old metal seemed to be the best method as the bracket had already been designed to follow the curve of the roof, and sit exactly on the inner roof rails.

With the cross rigidity solved, next was getting a roof panel and designing that to work. However, with how long this post has already become. I will be saving the rest of the write up for part 2. There is a lot more done over what has been pictured, and 90% of what will be in part 2 I already have done. But for my sake, lets keep this one under 2 pages.

Volvo 780 Bertone Project Pt. 2 - Why buying another persons project is the WORST.

Well already 2 months have passed of 2021, and here I am writing an update on my 1987 780 whilst sitting at my cold garage desk. To say this project has gone way deeper than I expected would be an understatement, but it has been a great learning experience along the way. As usual with these “catch up” posts, I will start from the oldest photos I have and work my way up to the present. This allows me to try and cover in-depth what I am doing and why, as well as structure the narrative a bit better. Without any further rambling, lets begin.

Lots of the work on the car so far has been in the engine bay. As expected with a PRV, nothing is quite perfect, and getting replacement parts is no easy task. Many of the parts are standard Volvo and Bosch units, however things like the Fuel Pressure Regulator is a Bosch part shared with a few air-cooled Porsches of the era, making them impossible to find at a reasonable price.

An engine bay detail was in order to really give the car some new life, as well as increase my quality of life while I spent long hours wrenching away.

Finally solving my rough running issues (which still somewhat persist now unfortunately), was a massive research undertaking. One piece I never checked originally was the cars air filter and MAF, a good place to start with any car suffering from performance issues. What I found was something I had never seen before.

Inside the filter housing.

The inside of the Bosch MAF

Let me explain these two photos. At some point Ether was used to try to start the car. Well the resulting backfire from this process caused the air filter to light on fire, which then melted the plastic. This molten plastic, then was sucked through the MAF from the engines vacuum, which coated the inside of the MAF in plastic, completely destroying it. Not once have I ever seen something like this. Thankfully, I was able to source a good used MAF, and trim the melted plastic out of the air filter housing. One problem for the books.

Next I replaced the “thermotimer”, which is Volvos name for the coolant temp. sensor. The unit on the car was original, and most likely as to blame for some of the rough running issues.

Last piece was the fuel pressure regulator, which was leaking significant amounts of fuel into the engine bay as well as past its rubber diaphragm. The old gas in the tank was sucked out as it had expired many years ago, and fresh premium gasoline was added to the tank. The filter was not replaced, however I may do that as well.

Moving on from the engine bay it was in order to clean up some pieces around the chassis that had been overlooked or improperly repaired by the previous owners. When the car was up on the lift it was easy to see that one of the sway bar end links had been damaged at some point, somehow resembling a “J” shape.

Vice grips were needed to prevent the rusted up end links from free spinning when removing the bolts.

The drivers side vs. passenger side end links.

As you can see from the photos, these were most likely original as well. The bent side was obviously trash and missing the lower bushings as well. Installation of these is actually very straight forward, and doesn’t even use a ball joint like many modern cars. These simply are a threaded rod with 2 bushings on each end to sandwich the chassis and sway bar.

Small details like the gas door cap were also fixed. This one really upset me because of the way it was repaired. These fuel doors were used on many different model Volvos, and a rebuild kit from online suppliers like IPD cost about $10 for a new clip and spring. The previous owner of this car was very liberal with their use of butyl “dumdum” tape.

Rivets and butyl tape…completely unneeded.

The rivets and tape were carefully removed to not exacerbate the damage they had done any more. The area was then wiped down and I was able to snap the new hinge into place. Its the small details that can really add value and show that the car was properly cared for, not just thrown together. Its these small details that I always strive to fix and improve, especially on a car as rare and collectible as this.

Part 3 should be following this write up soon. I wanted to split this into a few sections as I have a whole writeup on the power seats planned. Lets just say, its not a pretty sight…

Volvo 780 Bertone Project Pt. 1 - In Over My Head

So I had planned to make a write up on the 780 Bertone much before this month, but with work slowing down it was time to get in the holiday spirit of spending money and actually work on the 780. To make this simple for myself to follow (since it has been a slow couple of months tinkering with the car), I wanted to get a list made of everything I had marked down that the car needed when I got it. As follows:

• Passenger side hood latch not catching

• Radio mast bent / broken

• Radio not working

• Light fault warning

• Poor idle

• Broken drivers seat controls

• Oil Change

• Brakes going to floor

• Check coolant

• Electrical gremlins in dash / lighting system

• Suspension damage

• Exhaust rust

• Interior needs lots of TLC

Quite the extensive list I know. One of the first the first things I wanted to tackle was the mechanical bits and bobs so that I could actually drive the thing without it stalling or hitting a tree. First up was the brakes. I was told when I got the car that they were bad, and I was hoping for the best but expecting the worst. Got the car up on the rack and removed the wheels hoping that maybe it was just air in the lines.

After a full flush, it was becoming apparent that it was NOT a problem with air in the lines, but an issue with the master cylinder bleeding off pressure. Luckily brake master cylinders for these cars are shared with the 700 series as a whole, and as such I was able to get a good reman. one for the cheap.

The reservoir was cleaned thoroughly to ensure all the old crusty fluid was not going to contaminate the new master.

Thankfully installing one of these is just 2 bolts and 2 hardlines, and within an hour the new system was installed and bled. Now, the car could easily drive itself around the shop yard without being a complete risk of rolling away.

Next in the process was the hood / grille situation. I would like to mention that this car is repainted, and due to this many of the little trim pieces and parts have been removed and reinstalled. The grille was fixed in such a way that it was skewed at an angle, and this was quickly fixed by setting it correctly into its spot and using a new push tab to secure it.

The moisture in the headlight was easily remedied with a fan pointed into a funnel which was inserted into the bulb hole.

One of the larger issues was the hood not latching on one side, and I will preface this by saying that my “fix” still isnt 100% however it does work. These cars use a cable that pulls two releases (one on each side of the hood). One of these latches, due to the nature of the cable stretching over time, does not like to reset back into place once pulled, causing the hood to not properly relatch. Two adjustments were made for this, one in the car where the cable handle can be tightened to pull out slack, and greasing of the mechanism to help it return to its place. Unfortunately it still wants to stay in the open position, however it can be easily returned to place with a small flathead.

The silver bar slides over the hood bar to latch into place.

Moving into the engine bay, I wanted to start tackling the idle and rough running issues I was experiencing with the car. Thankfully, the previous owner had left a lot of new parts in the trunk for me to install like spark plugs, spark plug wires, distributor, distributor cap, and few other odds and ends. I figured I would throw all these parts into the car and see where it got me.

After the install of all these parts, unfortunately I was still getting a seeking idle as well as a slight misfire above 2500RPM. Time to hit the books, and really get my hands dirty with this motor.

Volvo 960 Project Pt. 5 - Taking my time.

960 Update

As luck would have it, the 960 started acting up just as I sold the S60. I was driving on Saturday around town when it suddenly started losing power. Immediately the engine began jumping in a feeling that I knew all too well from when I first got the car. Cylinder 2 was misfiring, and the loss of power was nothing short of significant as I was able to limp the car back to the shop under its own power. About a month prior during my road trip back from Florida I got a code for a lean running condition. I cleared those codes and they stayed gone for a wile, but now I can see that it was most likely the bad injector/spark plug I had starting to die on me. My first course of action was to replace the injectors as I had a spare set left over from the 850 days. The 960 actually uses the same Bosch injector as an 850. Installation is straight forward on the 960 as there are only 3 bolts holding the fuel rail in place. The bolts can be tough to access, and dropping one can mean losing it forever down below the intake manifold. For this I recommend using “dum-dum tape” which is 3M’s butyl rubber tape. A dab of the stuff inside a socket keeps the bolt securely in place during removal and the installation later on.

The plugs were also replaced at this time, I have no previous records on the car so most things I do are a mystery as to when they were last changed. The previous owner had installed NGKs which was a nice relief, and I used a Denso as a replacement as we already had them stocked in the shop. With the misfire resolved, it was time to test drive…

After only a few minutes the CEL was back on. This time for a rich condition. Damn. Back to the drawing board.

Well I knew that the condition had to have come from the “new” injectors. These were old used injectors from a junkyard car, so they were a mystery if they worked properly or not. I ordered a set of re manufactured injectors and began to inspect the ones I had.

My 960 most likely had its still original injectors. I could tell because all 6 bore the “A” mark, meaning they were part of the first batch of injectors that Bosch made for this part #. The 850, had 5 “B”s, and we also had a few spare “E”s in the shop.

I made sure to mark the old and new injectors so that I could tell which ones I replaced and which ones were “new”.

After I received the new injectors, I took a look at the rest installed in the car and found what was most likely causing my issues, broken O-rings.

Most of the injectors had broken or no pedestal, and this one had a very damaged O-ring.

One thing I did note about the reman. injectors I received was that they were all from different batches. While I later learned that it doesn’t make a difference, it would have been a nice peace of mind. These fresh injectors were tested and had new hardware like rings and caps. They were installed without a hitch and it has been running without a hitch (fingers crossed).

Everything was going great for about 3 hours. Thats when I decided to take the car out to go grab some dinner. Arrive at the location, go to grab the inner door handle and POP, the handle went limp on me. It still actuated the door, however it was not returning into place. In my haste, I got home, grabbed my tools, and began to remove the door panel. Well I did this without a guide so I just brute forced the doorcard off, thinking it would be the same as my S60. Well I was wrong, it destroyed the clips at the bottom that have a pop out retainer on them which is easily removed from the door…

You live and you learn.

Well I did find the culprit to my issue. The spring in the handle had sheared clean in half!

This is supposed to be one piece…

Removing the handle on the 960 is an easy process and only requires a punch / screwdriver and a hammer. It is help in with a pin with the spring behind it providing a force to return the handle to its resting location. A quick trip to LKQ and I had a new spring ready to go. I also had to order new pins for the door, but for now it is solid with just the screws behind the grab handle.