Project Nashville Pt. 2 - Tech Talk
Alright I admit it, I am shamelessly stealing further blog posts names from M539 Restorations on Youtube. With the sheer amount of cars I go through, I think it at least adds a little personality as I am not one to name cars.This part two is only going to be for a few items as I am not extensively modifying this car outside of a few cosmetics, and I have gotten pretty bad at recording things I am doing.
Section 1 - Emissions
The first thing I wanted to cover was the nagging CEL that seems to be playing hide and seek with me. The code being thrown is a P430 code which signifies that the bank 2 catalytic converter is below efficiency. In simple terms, the filter is letting too much fuel by and the O2 sensor is picking that up. This has no effect on driveability, however will set a Check Engine Light thanks to the EPA…
On the 3.2 motor the converters are a known failure point, however with such low milage the idea of dropping $2,000 on a new converter is not ideal. So before going all out, I decided to do some digging and check all the systems that could cause the code. I also checked the diagnostic readouts in VIDA (which we will get into later). The first items I replaced were the PCV box as well as the sensor for bank 2 sensor 2.
The oil trap on this car was original from when it left the factory and was still stamped with its 2009 build date. Usually at this age they begin to deteriorate and really recommended to be replaced at the 100,000 mile mark which this car is very much passed. A faully failed unit will make a distinct whistling noise due to the rubber diaphragm inside going. A decently old one such as this can be clogged and will effect fuel trims leading to the code I was seeing. Thankfully replacing these are decently easy, while not being a walk in the park either, located on the top of the motor they are much easier to access compared to the old whiteblocks. A few extensions and swivel sockets were needed to reach the back bolts, and much care was taken to not drop any down into the abyss.
Following this was the installation of a new O2 sensor. While I wish i had photos of this process I unfortunately had to pay a shop to replace it as my sockets and wrenches just could not break free the 10 year old+ threads. I went with an OEM Bosch sensor, one as a precaution and secondly due to some off readings I was getting from the original. Before replacing the sensor was flatlining at 0v randomly, I believed that this reading was causing the code to be thrown as it was not a reoccurring code, oly showing up every ~800 miles. Below are the readings are post sensor install. Not great as you can see the readings are still fluctuating indicating that the cat may still be bad.
The black is Bank 2 Sensor 2 Voltage (the bad cat), purple is Bank 1 Sensor 2, and the two others are the front O2 sensors.
Since these two items were installed (and the ECM parameters reset), I have driven about ~700 miles without issues. We shall see if the code returns. if it does, the next steps will an O2 sensor with built in mini-cat. If this does occur, i will make sure to have a seperate write up on fighting these stupid 3.2 emissions systems.
Section 2 - Cosmetics
If you have followed this blog, you’ll know I am a big proponent of LEDs, especially on these eastly P3s as they make the car look much more modern. Most of the kits I receive I buy off Amazon or AliExpress, links will be provided for each item.
License Plate Lights
Ease of install: 10
Two bolts and about 5 minutes is all you’ll need for these. Slots directly into where the originals were, gives a much cleaner look!
Before and after, LED vs standard filament bulbs.
Looks very clean with the upper LED tail lamp modification done by the PO.
Interior Lighting
Ease of install: 9
This kit came with lighting for all the interior bits and bobs. Some I have not installed yet like the visor mirror lamps or the glovebox, but they all fit without issue all around the car and make it much easier to see at night when digging through the car.
Puddle Lamps
Ease of install: 6
Not a fan of installing these, only due to the fact that getting the stock lamps out is a huge pain. The plastic become brittle and stiff over time so of course it broke trying to get it out. Luckily its no big issues as the replacement goes in easily, however I like to save the original equipment in case something happens to the aftermarket units.
Once installed they cast a nice white LED light, and illuminate much better than stock. Gives the car a clean look all around when on.
Well thats all for this installation. I was hoping to have also gotten some convex mirror glass, but the ones I ordered from China were not the right size. Sad. Hope everyone enjoys, I have a cool box of stuff from VPARTS coming soon as well, so stay tuned for that!
And I Would Drive 500 Miles - Project Nashville Pt. 1
Alexa….play Im Gonna Be by the Proclaimers
This is how I felt last weekend, perpetually on the road. To announce my new addition to the growing list of Volvos I have owned, let me set the stage.
Saturday. Wake up at 5am. Try to find a Lyft to the airport. Live in the middle of nowhere so none are available. Drive 960 to the daily parking deck. Sit in CLT terminal E for 2 hours. Fly to Nashville. Land, test drive car. Purchase car. Drive 7 hours back to Statesville. (I40W was closed for some god forsaken reason). Get home. Realize gear for the NASCAR race the next day is still in my 960 which is at the airport. Take Lyft to the airport. Pickup 960, drive back to Statesville (AGAIN). Go to sleep around 1130.
Got all that? Great.
Now I can finally show you all the car I picked up.
Thanks David for the photo.
(Doug Demuro Voice) THIS…. is a 2010 Volvo V70 R-Design, one of the rarest cars Volvo has sold in North America. Only sold for the 2010 model year, the running number is about 380 of these cars exist in the entire country. Or at least that was the number the time of production, current numbers will be lower due to some being wrecked or scrapped.
After dealing with stiff, sporty sedans I finally said enough as enough, I need a new wagon so that my poor old 960 wont have to be a daily driver anymore. I initially started looking for standard V70s, not as hard of a find due to them being sold from 08-10. Immediately I realized that finding one without a gross tan interior was going to require some searching. Due to their age, they seem to be in a mix of buy-here pay-here lots and private sales which also means a lot of them have little to no service history or any redeeming factors to justify their often obscene asking prices. Slowly losing hope that I would be able to find a proper replacement to my almost new Giulia I put out a feeler on Swedespeed, just to see if there were listings in the country I might have missed. After that I waited.
A few messages came in here and there. Mostly links to autotrader for cars I had already seen and inquired about. I was quickly realizing that buying a car from a dealer or scumbag car lot was not going to make any sense financially.
I gave up on my search and quickly hoped to looking at some XC70s. One had caught my eye in NJ and I booked a flight to go see it. To my dismay, it was in appallingly bad condition for its age, and the Audi dealer selling would not budge on price. I walked from the deal, and found myself headed back to my buddies place to book a flight for the next day to fly home. As luck would have it, thats when I received a phone call from David. He had messaged me on Swedespeed about his V70 he was thinking of selling. A white, former CPO V70 R-Design that had lived its whole life in the south. The timing couldn’t have been better, it was fate.
Flew out, did some time test driving up in the Smokies, paid and was on my way. This car has nicely extensive service history with lots of records on scheduled service plus other nice items like newer headlamps that really set the car off.
Driving the car home went without a hitch, even with the long drive the car did great. My only gripe is that I am not a huge fan of the currently installed Pirelli tires, I believe they are inferior in ride quality, noise and handling compared to Michelin Pilot Sports+ which I will most likely install later this year due to the current tires being from early 2018.
So far modification wise I have tried to stay relatively OEM+ with the exception being sequential style turn signals in the mirrors from VPARTS in Sweden. I am not sure if I like the look or not, but they were super easy to install. I may end up going back to the stock corner lamps with an LED installed or switch to black caps as I like to keep the look as OEM as possible.
Stock.
VPARTS.se Aftermarket
Additionally I did a R-Design dead pedal (did the same mod on my S60 back in the day), along with LED headlights and fog lights. The CEM was cracked with VDASH to add better headlight controls as the stock North American configuration is awful.
The car on the tender overnight while VDASH cracks the CEM, the process was started around 6PM and finished around 1am.
I think my only letdown with these early P3 cars is that they do not offer the same options that the later 2012+ models did like easily added remote start, or global window control with the key. I believe this is due to the early P3s using a 5 button PCC key instead of 6 as they are missing the “data” button used for those options.
The car already has an IPD sway bar and end links, and I plan on ordering the metal skidplate as it makes oil changes much easier and adds a level of protection for a lowered car.
As a side note, for audio I used a TUNAI Firefly LDAC BT to AUX adapter as the car only comes with AUX and USB for audio, Bluetooth for calls only. I am very impressed with this adapter and the sound system of the High Performance Sound in the V70 is exceptional, and as good as the Premium Sound I remember from my S60. The cable fits perfectly out of the way and connects as seamlessly as a built in bluetooth system. (If not faster and better than my Alfa Romeos stock system).
Under the garage lights after its first post trip wash. I also did a full glass regiment as well as decent clean of the interior and leather treatment. Some additional carpet shampooing will be needed for some stubborn sections, and a touchup pen is next on my order list.
The city and corner marker lamps were replaced with Sylvania 194 LEDs. The corner lamps were decently easy to access, with the center city lights being very hard to access requiring the use of a few picks and other long tools.
The full LED conversion give the car a much fresher and modern look, while also aiding in visibility.
With all the LEDs installed, all that is left is to order some Michelin Pilot Sport 4s from my friends up at Hailey Import Service. In part two, I will be installing the optional R design front bumper grille accessory as well as headlight eyelids both from VPARTS. Additionally I will install the more modern shifter like was done in my S60 a few years back, along with LED interior lighting and LED license plate lighting.
Links for all the products I use:
On life, cars, and business.
Life has happened.
My last post here was over 9 months ago. For a small update, the 960 is done, and has been for some time. A few other small projects have happened in the meantime, and some cars have come and gone.
In December of 2021, life gave me a major reset. I didnt want it, but it happened and I am now in a much better place because of it. The lease on my house was ending, and my time in Greensboro was coming to an end. It was time for me to move on from my position at Haileys and start my search for a new job to get me back on track for a full time career. In the interim I moved down to Charleston, SC with my parents. I lost my girlfriend over this whole series of events too, stating the distance would never work. Everything I had to comfort me, everything that was my daily routine was gone.
This business, my business, something that started off as a hobby, kept me motivated. This buisness gave me a reason to get out of bed in the morning when I felt like I had no other use. In truth, I didnt have much of a use other than walking the dog or doing some stuff around the house. For the past 2 months I spent my time trying to make it the best it could be. Finally I could focus on it full time and see how sucessful it could really be with 100% of my dedication behind it. NordCarolina LLC is an official business in South Carolina. Taxes and all.
I got to explore some cool places during this time, learned a lot of new spots to check, and met some interesting people along the way. Even my parents helped, clearing out some space in the garage for me to work and keep my car. Took it day by day and tried my best.
Now, I am back on track. NordCarolina has become my secondary work again. I recently began my position at SRI Performance as a Marketing Specialist. I am now based out of Mooresville, and spend most of my weekends at or around racing. Its just the start, but it feels like part of a bigger picture.
Hopefully soon once my life begins to settle into more of a regular routine, I can pick back up on my posts here. I have a lot of big plans for the 960, some of which may never happen now that I do not have access to a shop or big garage anymore. But never the less, I am always tinkering and finding new things to show the world. (Or well maybe the 3 people who read these blog posts). Keep an eye out, I have a cool youtube video in the works that ties into a product on the site that some may enjoy. Hell, maybe now I will finally get around to finishing the sunroof delete post.
2022, new job, new house, new life, same old shitty Volvos.
Archive
-
2025
- May 5, 2025 Volvo 700 Series In-Tank Fuel Sender Assemblies - Whats the deal? May 5, 2025
- Apr 28, 2025 Store Update: Shipping Rates and Carriers Apr 28, 2025
- Jan 1, 2025 Cash for Clunkers and Todays Car Marketplace - A Mathematical Analysis on Why Cash For Clunkers Doesn't Matter Anymore. Jan 1, 2025
-
2024
- Nov 25, 2024 11-16 Ford F250 / F350 Super Duty - Definitive Flow-Through Center Console Install Guide Nov 25, 2024
- Jul 30, 2024 13-16 F250 Steering Wheel and Audio Control Upgrade / Retrofit Guide for Dummies Jul 30, 2024
- Mar 13, 2024 Misc. Project - Volvo P3 Desk Chair Mar 13, 2024
- Jan 16, 2024 The Definitive P2 XC90 External Transmission Cooler Writeup Jan 16, 2024
-
2023
- Aug 8, 2023 TFT Display with P3Tool Guide Aug 8, 2023
- Aug 4, 2023 Facility Upgrades and Updates Pt. 2 - Tow Dolly Aug 4, 2023
- Mar 27, 2023 Facility Upgrades and Updates Pt. 1 - John Deere 165 Hydro Restoration Mar 27, 2023
-
2022
- Sep 27, 2022 P3Tool - Volvo Hacking Takes Its Next Big Step Sep 27, 2022
- Aug 25, 2022 Project Nashville Pt. 3 - MOST Excelent! Aug 25, 2022
- Jun 28, 2022 NordCarolina Shop Update! Jun 28, 2022
- Jun 20, 2022 Project Nashville Pt. 2 - Tech Talk Jun 20, 2022
- May 12, 2022 And I Would Drive 500 Miles - Project Nashville Pt. 1 May 12, 2022
- Mar 14, 2022 On life, cars, and business. Mar 14, 2022
-
2021
- Jul 19, 2021 Volvo 960 Project Pt. 6 - Still Alive Jul 19, 2021
- Mar 12, 2021 Volvo 780 Bertone Project Pt. 2 - Why buying another persons project is the WORST. Mar 12, 2021
-
2020
- Dec 7, 2020 Volvo 780 Bertone Project Pt. 1 - In Over My Head Dec 7, 2020
- Dec 7, 2020 Volvo 960 Project Pt. 5 - Taking my time. Dec 7, 2020
- Sep 11, 2020 A Very Volvo September Sep 11, 2020
- May 15, 2020 960 Project Pt. 4 - End of Spring Almost Summer Updates May 15, 2020
- Feb 3, 2020 960 Project Pt. 3 - Always Remember Your Oil Feb 3, 2020
-
2019
- Dec 17, 2019 Nord Carolina - Starting my own E-Commerce Platform for Volvo Enthusiasts Dec 17, 2019
- Nov 20, 2019 960 Project Pt. 2 - I built it one piece at a time... Nov 20, 2019
- Oct 2, 2019 960 Project Pt. 1 - Diving In Oct 2, 2019
- Sep 20, 2019 1997 Volvo 960 Project Pt. 0 - $800 Worth of Headaches Sep 20, 2019
- Aug 3, 2019 VDASH Pt. 2 - Cloud Based Car Tuning Aug 3, 2019
- Jul 2, 2019 VDASH Pt 2. is coming.... Jul 2, 2019
- Apr 1, 2019 VDASH Pt. 1 - A new tool for a modern Volvo hacker Apr 1, 2019
- Mar 18, 2019 2013+ Shifter Retrofit Project Pt. 2 - Reconstruction and Installation Mar 18, 2019
- Feb 17, 2019 2013+ Shifter Retrofit Project Pt. 1 - Preparation and Disassembly Feb 17, 2019
- Feb 2, 2019 The P3 Common & Uncommon Repairs Documentation Project Feb 2, 2019
-
2018
- Dec 28, 2018 Mini-Post: New side skirt. Dec 28, 2018
- Dec 8, 2018 Driveability and Performance Report: December 2018 Dec 8, 2018
- Oct 8, 2018 Audio Modules & The Return to Boostmoose Oct 8, 2018
- Jul 28, 2018 The Final Report: 850R Beauty Shots Jul 28, 2018
- Jul 17, 2018 Mid-July Summer Update Jul 17, 2018
- May 15, 2018 Summer Progress Update May 15, 2018
- Apr 1, 2018 850R - Stage 0 Dreams Pt. 2 Apr 1, 2018
- Mar 18, 2018 850R - 960 Throttle Body Upgrade pt. 1 Mar 18, 2018
- Mar 14, 2018 850R - Seat Restoration Mar 14, 2018
- Jan 18, 2018 S60R - Wrap Repair + Driving the Eastern Shore Jan 18, 2018
- Jan 1, 2018 S60R - Vinyl Wrap Jan 1, 2018
-
2017
- Dec 4, 2017 850R - Better and Brighter Tail Light Installation Dec 4, 2017
- Dec 4, 2017 S60R - Holiday Charity Laps at Virginia International Raceway Dec 4, 2017
- Nov 16, 2017 850R - Junkyard Pulls for Performance & New Rear Lights Nov 16, 2017
- Nov 15, 2017 S60R - Scheduled maintenance.....yawn. Nov 15, 2017
- Nov 3, 2017 850R - Stage 0 Dreams Pt. 1 Nov 3, 2017
- Nov 1, 2017 850R - Firestone Fixes CV Axle while Suspension Nears Completion Nov 1, 2017
- Oct 28, 2017 850R - Axle Removal and CV Boots Halt Progress Oct 28, 2017
- Oct 27, 2017 850R - Air Tool Woes and Broken Brakes Oct 27, 2017